Step One: Get Your Cleaning Materials & Chemicals
Strangely, the first product you need is a simple one; A pail. A five-gallon container would work nicely. If you do not have one you can get one from your regional hardware store or retail giant. Then you need some bleach. This can be through a liquid or a powder cleaner. (There is also solutions such as Basic Green's House and Siding Cleaner offered at home enhancement stores.) Finally, you require a scrubby of sorts. A sponge with a rough side will work well. It might not be smart to utilize a steel wool pad as that can take the paint completely off your garage door. You can likewise utilize a semi-soft brush with a handle, which may be a little simpler. Also, make certain to use a pair of gloves, either leather or latex.
Step 2: Prep Work
Once you have all your garage door cleaning materials, fill the (five gallon) bucket up midway and put those gloves on. Then pour in about half a cup of bleach. That might appear like a small amount however it is very important not to overdo it with the bleach. Naturally, if you are not comfortable using bleach, there are a couple of alternatives. Dish soap will work, just not also. Multi-purpose cleaner (without bleach) also works, however again, not as well.
Step 3: Prepared Set Tidy!
Now you are prepared to clean that garage door! Make certain you get every panel and every crack and crevice. It is usually better to do the top very first and work your way over from one side to the other. Then you can do the same thing for the bottom. Make certain to put some garage door repair elbow grease into it and get any areas of mold or mildew off. When the garage door is entirely scrubbed down, you can wash it off with the hose pipe or just by filling the bucket a couple of times. As always, if you have any questions or discover you need some garage door repair services, simply call a Los Angeles garage door repair expert!